Filter
Top Products
1 - 3
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
1
e-STUDIO350/352/353/450/452/453
SPECIFICATIONS
• Eliminated portion ............. Leading edges : 3.0±2.0 mm, Side/trailing edges : 2.0±2.0 mm (copy)
Leading / trailing edges : 5.0±2.0 mm, Side edges : 5.0±2.0 mm (print)
• Paper feeding .................... Automatic feeding : Standard drawers–2 drawers (stack height 60.5 mm,
equivalent to 550 sheets; 64 to 80 g/m
2
(17 to 22 lb.))
PFP–Option (One drawer or two : stack height 60.5 mm,
equivalent to 550 sheets; 64 to 80 g/m
2
(17 to 22 lb.)
LCF–Option (Stack height 137.5 mm x 2: equivalent to
2500 sheets; 64 to 80 g/m2 (17 to 22 lb.))
Bypass feeding: (Stack height 11 mm : equivalent to 100 sheets; 64 to
80 g/m
2
(17 to 22 lb.))
• Capacity of originals in the reversing automatic document feeder (Option)
.................
A3 to A5-R, LD to ST-R : 100 sheets / 80 g/m
2
(Stack height 16 mm or less)
• Automatic duplexing unit .. Stackless, Switchback type
• Toner supply ..................... Automatic toner density detection/supply
Toner cartridge replacing method
• Density control ................. Automatic density mode and manual density mode selectable in 11 steps
• Weight .............................. 83 kg, 183 lb. (e-STUDIO350/450)
86 kg, 189.59 lb. (e-STUDIO352/353/452/453)
• Power requirements ......... AC 110V (±10%) / 13.2A, 115V (±10%) or 127V (±10%) / 12A
220-240V (±10%) or 240V (±10%) / 8A
• Power consumption .......... 1.5 kW or less (115V series, 200V series)
*
The electric power is supplied to the RADF, Finisher, Job Separator, Offset Tray, PFP and
LCF through the equipment.
• Total counter ..................... Electronical counter
07/11