2 - 60
2
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-679
Fig. 2-680
(6) Remove 1 screw and take off the mainte-
nance cover.
(7) Disconnect 1 connector.
(3) Release the Latches and take off the front
lower cover of the hole punch unit.
Fig. 2-677
Fig. 2-678
(4) Remove 1 screw and slide the lever to the
front side.
(5) Takeoffthenisher.
Note:
Whenmovingthenisherunitbyitself,be
careful that it does not topple over.
05/11