Filter
Top Products
14 - 16
14
e-STUDIO350/352/353/450/452/453
AUTOMATIC DUPLEXING UNIT
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[M] Upper transport roller
(1) Take off the ADU, ADU inside rear cover ,
ADU opening / closing switch, paper guide,
and ADU cover ( Chapter 14.5 [A] to 14.5
[E]).
(2) Remove 2 screws and take off the opening
/closing lever.
(3) Remove the spring.
(6) Loosen 1 setscrew and take off the ADU
clutch.
Fig. 14-522
Fig. 14-523
Fig. 14-524
Spring
Setscrew
ADU clutch
Screw
Opening /Closing lever
[L] ADU clutch
(1)
Take off the ADU, ADU inside rear cover , ADU
opening / closing switch, paper guide, and
ADU cover ( Chapter 14.5 [A] to 14.5 [E])
.
(2) Take off the ADU motor ( Chapter 14.5 [J]).
(3) Take off the ADU gear unit ( Chapter 14.5
[K]).
(4) Remove 1 screw and disconnect the ground
wire.
(5) Disconnect 1 connector.
Fig. 14-521
Ground wire
Screw
Connector