Toshiba 350 All in One Printer User Manual


  Open as PDF
of 302
 
14 - 2
14
e-STUDIO350/352/353/450/452/453
AUTOMATIC DUPLEXING UNIT
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
14.2 Description of Operations
Thebacksideprinting(recordingdataofthebacksideofpaper)isperformedrstbyselectingduplex
printing mode and pressing the [START] button. When the trailing edge of the paper passes the exit
gate, the paper is switchbacked by the exit roller and transported into the ADU (the exit gate is closed
with its own weight), and then the switchbacked paper is transported with acceleration. The transporta-
tion decelerates in front of the upper transport roller of the ADU. The front side printing (recording data
of the front side of paper) is performed at the registration section. The paper passes through the exit
gate again and is transported to the receiving tray to complete duplex printing.
There are three methods of judging a paper jam: (1) whether the ADU entrance sensor is turned ON or
notinaspeciedperiodoftimeaftertheswitchbacktotheADUstarted(E510).(2)whethertheADU
exitsensoristurnedONornotinaspeciedperiodoftimeaftertheADUentrancesensoristurned
ON(E520).(3)whethertheregistrationswitchisturnedONornotinaspeciedperiodoftimeafter
the paper feeding from the ADU to the equipment (E110).
If the ADU is opened during duplex printing, the ADU motor and ADU clutch are stopped, namely, ADU
open jam occurs (E430).
The equipment is never to be stopped during printing by interruption in any case except paper jam or
service call.
The operation of the duplex printing differs depending on the size of the paper; single-paper circulation
andalternatenesscirculation.Theguresinthefollowingpagesshowthecirculatingoperationsduring
duplexcopying.Thenumbersintheguresindicatethepagenumbers.
 previous next