Toshiba 350 All in One Printer User Manual


  Open as PDF
of 302
 
4 - 8
4
e-STUDIO350/352/353/450/452/453
GENERAL OPERATION
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
• When the power is turned ON or the LCF drawer is inserted (when the power is turned ON or
equipment drawer / PFP drawers are inserted),
LCF performs initialization.
↓
Detects the presence of paper
Tray-up motor ON – The tray goes up
At this time, the tray-up sensor and LCF empty sensor are OFF.
Whenthetray-upsensorisnotturnedONinaxedperiodoftime,itmeansthatthe
tray is in abnormal condition.
→
“Add paper” is displayed regardless of presence/absence of paper.
↑
↓
Cleared by turning the power ON / OFF
Tray-upsensoristurnedONinaxedperiodoftime.
– The tray motor stops.
At this time, if the empty sensor is ON: It is judged that there is paper.
OFF: It is judged that there is no paper.
↓
Drawer area of the illustration blinks (When the drawer is selected)
• When the paper in the drawer runs out during copying,
→
The tray-up sensor turned OFF
→
The tray-up motor turned ON
→
Tray goes up
The tray-up sensor turned ON
→
Tray-up motor stopped.
• Empty sensor turned OFF during the copying in spite of the tray-up sensor is ON
It is judged that there is no paper.
↓
Drawer area of the illustration blinks (When the drawer is selected)
↓
The copying operation is stopped.
→
→
 previous next