Filter
Top Products
7-12 Windows NT/LAN Server Configuration
8. You should now be able to print. To test the queue,
type the following from either the OS/2 command
prompt or from a DOS workstation:
COPY C:\CONFIG.SYS \\
servername
\
alias
where servername is the name of the file server and
alias is the alias name that you specified during this
configuration process. This should print the
CONFIG.SYS file on the printer. Note that if you
selected a binary service as the LPD printer name, the
lines will be staggered; don't worry about this because
normal DOS, Windows, and OS/2 applications will
print OK.
9. The TROY XCD print server will appear as a standard
OS/2 printer to application programs. To make the
TROY XCD print server operate transparently with
DOS programs, execute the following command on
each workstation:
NET USE LPT1: \\
servername
\
alias
This will make the printer and the TROY XCD print
server appear to the software as a printer that is directly
connected to the parallel port of the workstation.