Filter
Top Products
LAT Network Configuration 11-11
operating systems (e.g., RSTS/E and RSX-11M-PLUS).
Refer to the appropriate DEC documentation for information
on setting up LAT print queues on these systems.
Changing the Configuration (Optional)
The print server default configuration is adequate for most
applications. However, if you wish to change the
configuration, you may access the print server console via
the NCP or NCL utilities on a VMS system, the ccr or
TELNET commands on an ULTRIX computer, or through
the serial port using DECserver-style commands. The
configuration procedure is described in detail in Appendix A.