Filter
Top Products
PrintraNet Internet Printing 13-11
Using XAdmin, XAdmin32, or WebXAdmin to
Configure the Print Server
NOTE: Skip this section if you wish to use the print server
console to configure the print server.
Two graphical user configuration programs are included on
the TROY XCD Print Server Software diskette or CD-ROM
that is shipped with every TROY XCD print server. XAdmin
runs on Windows 3.11 or Windows 95/98, while XAdmin32
runs on Windows 95/98 and Windows NT. To use XAdmin
or XAdmin32, you must be running either NetWare or
Banyan VINES client software, and the PC must be on the
same network as the TROY XCD remote print server.
WebXAdmin allows the print server to be managed by any
standard web browser using the TCP/IP protocol. Refer to
Chapter 3 for additional information on XAdmin,
XAdmin32, and WebXAdmin.
The steps required to configure the print server to receive
print jobs from a Windows 95/98/NT PC running the
PrintraNet software are as follows:
1. Select the name of the desired TROY XCD print server
from the list by double clicking on it (XAdmin or
XAdmin32) or entering its IP address (WebXAdmin).
4. Click on the Internet tab or button.
5. Enter the IP address of the POP3 server (consult your
network administrator if you do not know this address).
6. Enter the mailbox name for the remote TROY XCD print