Filter
Top Products
Banyan VINES Installation 12-9
assign a password to the print server with the
MANAGE program.
SET SERVIce
service
STreettalk
queuename
Purpose: Enables the Banyan protocol on the specified
TROY XCD print server service and associates this
service with the StreetTalk name of a given print queue
the VINES file server. Type SHOW SERVICE to see
a list of the available services (if in doubt, use
BINARY_P1 for the parallel port , BINARY_S1 for
serial port, BINARY_P2 for the XConnect 100 second
parallel port, and BINARY_S2 for the XConnect 100
second serial port).
3. If required, the following additional commands are
available:
SET BANyan HOp
nn
Purpose: Sets number of hops between the TROY
XCD print server and the Banyan file server. The
default value is 2, which is adequate for most sites, but
you will need to change this value if the file server is
more than two hops away from the print server.
SET BANyan [ENable|DISable]
Purpose: Enables or disables Banyan protocol on the
TROY XCD print server. Banyan is enabled by
default.
SET BANyan TImeout
nn
Purpose: Sets job timeout (in seconds).
CLEAR SERVIce
service
STreettalk
Purpose: Disables the Banyan protocol on the
specified service.