Filter
Top Products
8-6 Windows 95 Peer-to-Peer Configuration
2. Select Browse, double click the HP_Network_Printers
icon, and then select the print server name server name
(default name is XCD_xxxxxx_pp , where "xxxxxx" is
the last six digits of the Ethernet address and "pp" is P1
for the first parallel port, and if present, S1 for the first
serial port, P2 for the second parallel port; the
XConnect 100 second serial port is not supported).
Click on Next.
Please note pre-V2.33 versions of JetAdmin do not
support Peer-to-Peer printing from DOS applications
(this is a Microsoft/HP bug).
3. Select the desired printer manufacturer and model
(click Have Disk if your printer is not listed), and click
on Next.
4. If the driver already exists, select Keep Existing
Driver (if it does not, this step will be skipped), and
then click on Next.
5. If desired, change the name of the printer and/or make
it the default, and then click on Next.
6. If desired, you may print a test page (this may take a
few minutes to print). Click on Finish to complete the
installation. You may now print to the printer as if it
were a local printer