Filter
Top Products
B-4 Using Services
Note that the string numbers within the quotation marks are
expressed in hexadecimal when used with this command.
To associate a string with the service, use the following
commands:
SET SERVICE
servicename
BOT
stringnumber
SET SERVICE
servicename
EOT
stringnumber
where servicename is the name or number of the service and
stringnumber is the number of the string as defined above.
The first command (BOT) adds the specified string to the
beginning of the job, while the second command (EOT) adds
the specified string to the end of the job. A given service can
have both a setup and reset string associated with it.
To clear a string number, type:
CLEAR SERVER STRING
stringnumber
To clear a setup or reset string, set the string number to 1
(the null string):
SET SERVICE
servicename
BOT 1
SET SERVICE
servicename
EOT 1
Enabling Protocols on a Service
You may enable or disable protocols that can access a given
service with the following commands:
SET SERVICE
name
LAT
ENABLED
SET SERVICE
name
IP
ENABLED
SET SERVICE
name
NETWARE
ENABLED