Filter
Top Products
8-2 Windows 95 Peer-to-Peer Configuration
information on setting the print server IP address with
XAdmin32)
• HP JetAdmin (only required in the Control Panel if you
have a version of JetAdmin earlier than V2.33)
• The appropriate network adapter driver (for example,
3Com EtherLink III)
If you want to use a version of JetAdmin later than 2.0, you
must install JetAdmin on your PC. JetAdmin is included on
the Windows 95 distribution CD, or it can be downloaded
from the HP web site. The JetAdmin setup program provides
a step-by-step guide through the installation process.
Important:
JetAdmin 3.3 or later requires XJet firmware
version 3.58 or higher.
Important:
Windows 98 requires either JetAdmin V2.54
(this version can be installed from the Microsoft Windows
98 CD by running the SETUP.EXE file in the
DRIVERS/PRINTERS/JETADMIN/DISK1/
directory) or V3.30 or later (available on the HP web
site).
Configuring Windows 95/98 Peer-to-Peer (JetAdmin V3.0
and above)
1. Go the Start button, choose Programs, HP JetAdmin
Utilities and then Add HP JetDirect Printers. Select
Custom Setup and press Next.
2. Select either IPX/SPX or TCP/IP printer, depending on
which protocol you want to use. Click on Printer List
to get a list of available printers (or you may manually
enter the information).