Filter
Top Products
2-12 Installation
Figure 2-4
Connecting the Print Server to a 10baseT UTP network
To hub
unshielded
twisted pair cable
Serial 2) for use with serial printers. This limitation can be
fixed by upgrading to a newer version of the firmware.
Step 3 Ethernet Installation
The XConnect II can connect directly to either a 10baseT
unshielded twisted pair Ethernet or a 10base2 thin Ethernet.
The XConnect II Lite-2 can connect to a 10base2 thin
Ethernet, while the XConnect II Lite-T and the Pony Print
Server Plus can connect to a 10baseT Ethernet.
The Pony 100 and XConnect 100 connect to either a
100baseTX Fast Ethernet network or a 10baseT Ethernet
network. It automatically senses the type of network, so no
configuration is required.