Filter
Top Products
13-12 PrintraNet Internet Printing
server. Usually this will be the first part of the E-mail
address that you entered in step 9 (for example, if the E-
mail address of the remote print server is
emailprinter@xyz, then the mailbox name would be
emailprinter.
7. Enter the password for the mailbox, if any.
8. The print server is configured by default to poll the POP3
server every 30 seconds. You may change this value, if
desired.
9. If you have enabled notification, enter the IP address of
your SMTP server (consult your network administrator if
you do not know this address).
10. Press the OK button., and exit XAdmin or XAdmin32.
You have now configured the print server to receive print
jobs. Skip to the Printing to the Remote TROY Print
Server section later in this manual.
Using the Console to Configure the Print
Server
NOTE: Skip this section if you used XAdmin, Admin32, or
WebXAdmin to configure the remote TROY XCD print server.
As an alternative to the TROY XCD graphical configuration
utilities, you can use the print server console to configure the
remote TROY XCD print server. The console can be
accessed via the print server serial port, TELNET, DEC
NCP, or the TROY XCD XCONFIG utility. Refer to
Appendix A if you do not know how to use the console.