Filter
Top Products
Novell Network Configuration 5-5
extensively during the configuration process, so be sure to
remember them. The names are as follows:
XConnect II
XCD_xxxxxx_P1 (parallel port)
XCD_xxxxxx_S1 (serial port, if enabled)
XCD_xxxxxx_LN (parallel port if LN03 option
is installed)
XConnect II
XCD_xxxxxx_P1 (parallel port)
XCD_xxxxxx_S1 (serial port, if enabled)
XCD_xxxxxx_LN (parallel port if LN03 option
is installed)
XConnect II Lite
XCD_xxxxxx_P1 (parallel port)
XCD_xxxxxx_S1 (serial port, if enabled)
Pony Print Server Plus
XCD_xxxxxx_P1 (parallel port)
The default NetWare print server names are actually the
names of the print server's NetWare services (refer to
Appendix B for more information on services). The "xxxxxx"
in all of the above cases is the last six digits of the Ethernet
address (for example, XCD_034578_P1). Refer to the label
on the print server or to the print server self-test for the
Ethernet address. If desired, you may change the default
names to something more meaningful by using XAdmin32,
XAdmin, WebXAdmin, JetAdmin, or the print server
console.