Filter
Top Products
Banyan VINES Installation 12-7
path on the CD-ROM), click OK, and follow the
instructions on the screen.
2. Double click on the XAdmin icon to start the program
under Windows.
3. The print server name (XCD_xxxxxx_P1, where
"xxxxxx" is the last six digits of the Ethernet address)
will show up in the list. If it does not, double check
your Ethernet cabling and (if applicable) hub
connection. Click on this name with the mouse button.
4. Click on the Configure button.
5. Click on the Banyan tab.
6. The Banyan hop count is set by default to two hops,
which is adequate for most networks. However, if the
file server is located more than two hops from the print
server, you must set the hop count to the appropriate
value.
7. Enter the StreetTalk name of the TROY XCD print
server (this must exactly match the name you entered in
Step A-3). If the StreetTalk name has spaces in it, you
must enclose the name in double quotation marks (for
example, "john smith@uc engineering@irvine"). If
you entered a password in step A-3, you should also
enter the same password here.
8. Click on the Services tab.
9. Double click on the service you wish to enable for
VINES. If in doubt, use BINARY_P1 (for the parallel