Filter
Top Products
13-10 PrintraNet Internet Printing
by accessing the print server console through the print server
serial port or via TELNET, DEC NCP, or XCD's XCONFIG
utilities. Refer to Appendix A for information on how to use
the serial port, TELNET, NCP, or XCONFIG to access the
print server console.
Print Server Configuration Checklist
Before configuring the print server to receive PrintraNet
print jobs, check the following:
1. Make sure that the E-mail server at the remote site (the
receiving end) is configured to handle the TCP/IP POP3,
and SMTP protocols (SMTP is only required if the
notification feature is enabled).
2. Configure the POP3 server on the E-mail server at the
remote site with a mail account and password for the
remote printer (generally, the mail account name will be
the first part of the name that you assigned in step 9 of
the previous section; for example, if you assigned the
name emailprinter@xyz.com, the account name would be
emailprinter). The procedure for configuring a POP3
server varies depending on the operating system of the E-
mail server, so consult your operating system
documentation for details.
3. Make sure that the TROY XCD print server is installed
and running with TCP/IP enabled and has a valid IP
address assigned to it.
Because access to the E-mail server on most networks is
usually restricted, you may need to have your network
administrator check the configuration and add the mail
account.