Filter
Top Products
5-8 Novell Network Configuration
NetWare P2 tab to configure the XConnect 100 second
parallel port, or the NetWare S2 tab to configure the
XConnect 100 second serial port.
• If it is not already selected, select Queue Server as
the operating mode.
• Click on the ▼ button and select the NDS tree (if
you are using the Microsoft NetWare client, you
must type in the name of the tree)..
• Click Change... button to select the NDS context
where the queue will reside (if you are using the
Microsoft client, you must type in the name of the
context).
• If desired, you may change the print server name (do
this with caution, because it changes the print server
service name and will therefore affect any other
protocols that use this service).
If you are using the Microsoft Client for NetWare, STOP
HERE. Go to the Adding NetWare Print Queues Using
NWAdmin section to complete the configuration.
6. Click on the Change NDS Queues... button to
configure an NDS print queue or click the Change
Bindery Queues... to configure a bindery mode queue.
7. Two windows will appear, Available Print Queues and
Serviced Print Queues. First go to the Available
Print Queues window:
• If you are configuring an NDS queue, click on the
context where the print queue will reside.