Filter
Top Products
8-4 Windows 95 Peer-to-Peer Configuration
9. Choose the port you created in step 5 and then click
Next.
10. Pick any name for the printer and click Next. Print a
test page if desired, and then press Finish.
Configuring Windows 95 Peer-to-Peer (JetAdmin V2.33
to 2.53)
1. Go to the Start button, choose Settings, and then
select Printers. Click on the Add Printer icon,
click Next, select Local printer, and click Next
again.
2. Select the appropriate printer driver and click Next.
Choose LPT1: as the port and click Next. Pick any
name for the printer and click Next. Do not print a
test page. Click Finish to complete the preliminary
printer installation.
3. Click on the printer icon of the printer you just created.
From the File menu, choose the Properties and then
select the Details tab.
4. Choose Add Port.
5. Select Other.
6. Choose HP JetDirect port, OK.
7. Select IPX/SPX Printer (if you are using the IP/SPX
compatible protocol) or TCP/IP Printer (if you are
using TCP/IP) and click on Search. Select the desired
print server from the list and click OK (it is also
possible to manually type in the print server address,