Filter
Top Products
NetBEUI Configuration 9-1
9
Microsoft Network Configuration
(NetBEUI or NetBIOS/IP with
Windows 95/98, Windows NT,
OS/2 Warp/LAN Server)
Overview
Certain TROY XCD external print server models support the
NetBEUI and NetBIOS/IP protocols for printing on Microsoft-
compatible networks (refer to chapter 1 for specific protocol
support information). Because they also support the SMB
protocol, TROY XCD print servers automatically appear in the
Windows Network Neighborhood and can be managed using
standard operating system utilities.
Note: The workstation will automatically use NetBIOS/IP if
TCP/IP is enabled on it. It will use NetBEUI only if TCP/IP
is not available.
Note: NetBIOS/IP operation and support for more than one
port requires V3.62 or later firmware. The latest firmware is
available on the Internet at http://
www.troyxcd.com.
Important: If you are using NetBIOS/IP, you must first
configure the print server with a valid IP address using the
XAdmin32 utility as described in Chapter 3. You may also