Filter
Top Products
Novell Network Configuration 5-9
• If you are configuring a bindery queue, click on the
volume where the queue will reside (a volume name
will have a file server icon next to it).
8. Click on New Queue.
• Enter any unique name for the Queue name. If you
are configuring a bindery queue, click OK and
proceed to step 8.
• If you are configuring an NDS queue, click
Browse, select the file server volume where you
want the queue to reside (a volume name will have
a file server icon next to it), and click OK.
9. The queue name will now appear in the Available
Print Queues under the selected volume (for bindery
mode) or in the selected context (for NDS mode).
• Click on the desired queue.
• Click on Add>>
The name will now appear in the Serviced Print
Queues window.
10. Click Close and then OK. You can now use the print
queue from your NetWare workstation.
Configuring the Print Server and Print Queue with
HP JetAdmin 3.XX (Queue Server Mode)
NOTE: JetAdmin 1.xx and 2.xx do not allow direct
configuration of NetWare print queues. If you are using
these versions, you may configure the print server with