Filter
Top Products
5-14 Novell Network Configuration
configuration changes. If you are using WebXAdmin,
click Submit and exit the browser. Proceed to the next
section, Adding NetWare Print Queues using NWAdmin.
If you are using bindery mode with XAdmin (not
available with WebXAdmin), you may click on the Add
Queue button to directly add a NetWare bindery queue:
• Click Create. Use the ▼ button to change the file
server volume and then enter any unique name for the
print and click OK.
• Click Yes when asked if you want to add the queue to
the service list, click OK and Close. The queue will
appear in the Bindery Print Queues window. Click
OK and then Yes. You can now use the print queue
from a NetWare workstation. Skip to the
Configuring the Windows Printer section.
If you are using bindery mode with WebXAdmin, click
Configure NetWare from the main menu, type in the
name of the file server where the print queue will
reside, and click Add. Proceed to the next section,
Configuring NetWare Print Queues using NWAdmin.
Adding NetWare Print Queues Using NWAdmin
(Queue Server Mode)
If you are using XAdmin32 with the Microsoft NetWare
client, or you are using XAdmin, WebXAdmin, or JetAdmin
1.xx or 2.xx, you need to use NWAdmin to configure the
actual NetWare print queue. This is because these utilities
only allow you to define the print server context and tree (or
file server, if you are using bindery mode). The following
steps are required: