Filter
Top Products
5-12 Novell Network Configuration
server volume that you selected in the previous step.
Click OK to continue and go to step 9.
9. Click Yes when asked if you want to add the queue to
the list of serviced queues. The queue name will now
appear in the Available Print Queues in the selected
context (for NDS mode) or under the selected volume
(for bindery mode).
10. Click OK and then Next. If applicable, enter the IP
address and click Next.
11. If desired you can enable users that will be notified in
the event of printer problems. Click Finish. You can
now use the print queue from your NetWare
workstation.
Configuring the Print Server using XAdmin Version
2.0 or WebXAdmin (Queue Server Mode):
Important Note: Although XAdmin runs on Windows 95/
98, TROY XCD recommends that you use XAdmin32 on these
operating systems.
1. If you are using XAdmin 2.0, install the XAdmin
software. On Windows 3.xx systems, go the menu bar
in the Program Manager, select File, and then Run.
Click Browse to locate the Setup file (either on
floppy disk or in the \Utilities\XAdmin folder
on CD-ROM. On Windows 95, go the Start button,
select Run, and then Browse for the Setup file.
Click OK to start the installation.