Filter
Top Products
Media Output Locations
Xerox® WorkCentre® 3215/3225
User Guide
94
Media Output Locations
Note: Some features may not be available on your model. Check your machine type in Getting
Started.
The machine has two output locations:
• Output tray, face down, up to a maximum of 120 sheets
of 20 lb (80 g/m²) paper, 10 transparencies and 10
sheets of labels.
• Rear cover, face up
, one sheet at a time.
The machine sends output to the output tray by default. If
special media, such as envelopes, print out with wrinkles, curl,
creases, or black bold lines, the rear cover should be used for
the output. Open the rear cover and keep it open while
printing one sheet at a time.
Note: The rear cover output can only be used for simplex
jobs. Duplex printing with the rear door open will cause
paper jams.
Using the Output Tray
The output tray collects printed paper face down, in the order in which the sheets were printed. The
output tray should be used for most jobs.
To use the output tray, make sure that the rear cover is closed.
Notes:
• If paper coming out of the output tray has problems, such as excessive curl, try printing
to the rear cover.
• To reduce paper jams, do not open or close the rear cover while the printer is printing.