Filter
Top Products
Authentication
Xerox
®
WorkCentre
®
3215/3225
User Guide
197
Configure External Authentication
Information Checklist
Before starting ensure that the following items are available and/or the tasks have been performed:
• Ensure that the external network server to provide authentication is functional on your network.
Refer to your manufacturer's documentation for instructions to complete this task.
Configure Kerberos (Unix/Linux)
1. At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select Properties.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Click Properties.
5. In the Security link on the left hand side, select the Authentication link. The Authentication
Method page displays.
6. For Authentication Method select Kerberos (Unix, Linux).
7. Select Apply.
8. In the Network Security link, select External Authentication.
9. Select Kerberos Server.
10. Select the Add button.
11. In the Required Information area:
a. Enter the Realm.
b. Enter the Server Address and Port Number.
12. Select Apply to save the changes.
13. Select OK when the acknowledgement message displays.
14. Follow the steps in Verify Authentication Is Enabled at the Machine to check that you have set up
authentication correctly.