Filter
Top Products
Consumables
Xerox® WorkCentre® 3215/3225
User Guide
205
Maintenance Options
When you install your Xerox WC3215 or WC3225, you can set up a few parameters for maintenance
features. These options are shown in the chart, and are accessed through these steps:
1. Press the Machine Status button on the control panel.
2. Scroll through the options and select System Setup. Press OK.
3. Scroll to Maintenance and press OK. Scroll through the options and select the maintenance
features you wish to use.
Menu Item Options
Supplies Life Series of options that enable printing the status of
specific parts; used by Service or at direction of
Service.
Image Manager Use this to control the density of all the images that
are printed. You can select Color images, Black and
White, or Greyscale, and then set the density for each
print from -10 to 10.
Toner Low On or Off. When On is selected, the printer will notify
users that the toner is low via several methods: the
status light on the control panel, a message at a
user’s PC, and/or an e-mail sent to the System
Administrator.
Image Unit Low On or Off. When On, the printer will notify users that
the drum cartridge needs replacing via control panel
light and message. The printer will eventually stop
printing if the cartridge isn’t replaced.
Serial Number When this is selected, the Serial Number will be visible
in the machine’s user interface.