Filter
Top Products
Loading Paper
Xerox® WorkCentre® 3215/3225
User Guide
87
Envelope Mode
1. Press to open the manual feed slot, located on the front
of the machine.
2. Remove any curl on the envelope before loading it into
the manual feed slot.
Note: For more information on media specifications,
refer to Media Specifications.
3. Load the envelope short edge feed and with the flap
facing down as shown in the illustration.
4. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
5. When printing from your computer, ensure you press the
Paper tab to specify the correct paper size and type. For
the source, you must select Manual Feed Slot. Not
confirming the paper details may result in printing
delays.
Note: For information about setting the paper type and size on the control panel, refer to Setting
Paper Size and Type.
Note: The settings made from the printer driver on your computer override the settings on the
control panel.