Filter
Top Products
Loading Paper
Xerox® WorkCentre® 3215/3225
User Guide
86
Loading the Manual Feed Slot
1. Press to open the manual feed slot, located on the front
of the machine.
Note: The manual feed slot holds 1 sheet of the following
media: 20 lb (80 g/m²) plain paper, transparency, label,
envelope, or cardstock.
2. Load the print material between the width guides with
the print side facing up.
Note: Hold a transparency by the edge and avoid
touching the print side.
3. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
4. When printing from your computer, ensure you select the
Paper tab button to specify the correct paper size and type. For the source, you must select
Manual Feeder. Not confirming the paper details may result in printing delays. For information
about setting the paper type and size on the control panel, refer to Setting Paper Size and Type.
Note: The settings made from the printer driver on your computer override the settings on the
control panel.