Filter
Top Products
Loading Paper
Xerox® WorkCentre® 3215/3225
User Guide
84
Loading Paper
One paper tray and a manual feed slot are standard on your machine.
Various media sizes and types can be used in the trays. For more media specifications, refer to Media
Specifications.
Preparing Paper for Loading
Before loading paper into the paper trays, flex or fan the
edges of the paper stack. This procedure separates any sheets
of paper that are stuck together and reduces the possibility of
paper jams.
Note: To avoid unnecessary paper jams and misfeeds do
not remove paper from its packaging until required.
Loading Tray 1
The paper level indicator on the front of tray 1 shows the
amount of paper currently left in the tray. When the tray is
empty, the indicator is completely lowered as shown in the
illustration:
1 shows full, 2 shows empty.
Using the instructions provided below, load paper into the
machine. Tray 1 holds up to 250 sheets of 20 lb (80 g/m²)
paper, A4 and letter only. It holds fewer sheets of other media
sizes. For more media specifications, refer to Media
Specifications.
1. Pull out tray 1 and load paper into the tray, print side
down. Do not fill above the Maximum Fill line indicated
by the symbol .