Installation Wizard
Xerox® WorkCentre® 3215/3225
User Guide
27
Installation Wizard
1. On initial power on the Installation Wizard runs, the Language menu displays.
2. Press the up/down arrows to select the required language and press OK.
3. The Format Date menu displays. Press the up/down arrows to select one of the following and
press OK:
• MM/DD/YYYY
• DD/MM/YYYY
• YYYY/MM/DD
4. The Set Date menu displays.
a. Press the buttons on the keypad to enter the date or press the up/down arrows to increase or
decrease the value shown on the screen.
b. Press the up/down arrows to move from one section of the date to another.
c. When you have entered the date press OK.
5. The Format Time menu displays. Press the up/down arrows to select one of the following and
press OK:
• 12 Hour
• 24 Hour
6. The Set Time menu displays. Press the buttons on the control panel to enter the time and press
OK.
7. The Metric Defaults menu displays. Press the up/down arrows to select one of the following and
press OK:
• Inches
• mm
8. The Default Paper Size menu displays. Press the up/down arrows to select one of the following
and press OK:
• Letter
• A4
9. The Allow Upgrade menu displays. Select Yes or No and press OK.
10. The Admin Passcode menu displays. Select Yes or No and press OK. If you select Yes, enter a
value on the SetAdminPasscode menu and CfmAdminPasscode menu.
11. The Customer Support menu displays.
a. Press the up/down arrows to select Enter Cust. Support #.
b. The Enter Cust. Support # screen displays. Enter the telephone number of your customer
support center.
c. Press OK.
d. The
Enter Supplies Order # screen displays.
e. Enter the telephone number to order supplies.
f. Press OK. The Fax Setup menu displays.
g. Press the up/down arrows to select one of the following and press OK:
• Continue Setup