Filter
Top Products
• 2-53 • RMAN-QLS-002 rev. A Repair Procedures
6. Dress the (optional) Width Sensor Cable through the Printer and secure the
Cable.
8. Install the Printer Frame to the Lower Housing.
9. Plug in the Bar Sensor Cable, the Label Presence Sensor and the optional Media
Width Sensor to the MLB. Plug the Printhead, Motor, Head-up switch, and Bar
sense cables into the MLB.
10. Install the Upper Housing. Ensure that the “D”-Rings or optional hand strap
components are in-
stalled.
11. Install the QuickLink
Module.
12. Install the battery.
13. Test the Printer.
Printer Frame
Media Assy.
Gap Sense Cable
Screws
Fold Gap
Sense Cable
Dress Media Width Sen-
sor Cable on -003 & -004
Kits only
Slide Rack Lock
Secure Media Assem-
bly to Printer