Filter
Top Products
RMAN-QLS-002 rev. A Repair Procedures • 2-76 •
6. Install the Upper Housing.
7. Install the QuickLink Module.
8. Install the Battery Pack
9. Test the Printer.
Installing a Membrane Key-
pad
1. Plug the ex circuit from the Keypad into J6.
Lock the connector.
2. Fold the static ground strap from the Keypad so that exposed copper on the
end of the ground strap will make contact with the pad on the MLB. Secure the
Ground Strap to the MLB with the #4-40 x 1/4 Socket Hd. Screw and #4 Nylon
Washer.
3. Slide the Keypad Assembly into the Lower Housing as shown, dressing the ex
circuit and ground strap down and under the MLB.
4. Install the Upper Housing
5. Install the Wireless
Module.
6. Install the Battery
Pack
7. Test the Printer.
LCD Keypad
Screw, Socket Hd. #4-40 x 1/4
& #4 Nylon Washer
Display Cable
Keypad Cable
Membrane Keypad
Screw, Socket Hd. #4-40 x 1/4
& #4 Nylon Washer
Keypad Cable