Filter
Top Products
• 2-107 • RMAN-QLS-002 rev. A Repair Procedures
Tools needed:
Phillips Head Screwdriver
Removing the Belt Clip
1. Remove the (2) Screws securing the Belt Clip to the Lower Housing.
2. Remove the old Belt Clip.
Installing the Belt Clip
1. Slide the Belt Clip into the Belt Clip Retainer.
2. Secure the Belt Clip and Belt Clip Retainer to the bottom of the printer with (2)
Screws (supplied) as shown.
M3 x 10mm Self Tapping Screw
Torque = 5 in-lbs
beLt cLip, QL 220/220 pLuS, QL 320/320 pLuS & QL420/420 pLuS
- an16744-1 & an16753-009
QL420
QL220
QL320
Belt Clip
Belt Clip Retainer
Belt Clip
Screw (2)
Belt Clip Retainer
Belt Clip Retainer
Belt Clip
Screw (2)