Filter
Top Products
RMAN-QLS-002 rev. A Repair Procedures • 2-94 •
Latch Assembly
Latch Spring
Latch Shaft
Insert 3/32” Hex
Driver or Spare
Peeler bar
Apply Super-Lube to
inside surface
Apply Super-Lube to gray areas
Latch Shaft.
6. Press The Latch Shaft Into Position. Press the Latch Shaft so that the ends are
ush with the sides of the Latch Assembly.
7. Remove the tool from between the Latch Lock and the Printer Frame.
8. Apply SuperLube to the bearing points on each end of the Latch Lock where
shown in details.
9. Test the Latch. Press the Latch Lock Button. The latch assembly should pop
open and be held in position by the Latch Spring.
10. Close the latch assembly, and ensure that the Latch Lock snaps back into posi-
tion and the latch Assembly is locked in place.
Apply Super-
Lube to gray
area