Filter
Top Products
Chapter 4: Configuring the Radios
118
2. In the Data/Voice Settings field, choose either Data and SpectraLink
Traffic or SpectraLink Traffic Only. For help, see “Configuring 802.11b
Radio Advanced Parameters” on page 112.
3. Check the Allow Data Rate Fallback check box.
4. In the Basic Rate field:
if you are using a 2 Mbps SpectraLink telephone, set it
to 2 Mbps.
if you are using a 1 Mbps SpectraLink telephone, set it
to 1 Mbps.
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.