Filter
Top Products
Chapter 2: Installing the Access Points
56
Note
All cables must be multimode, 62.5/125 µm.
Connecting to an
MT-RJ Network
To connect to an MT-RJ network, you need:
a patch cord with a female MT-RJ connector to insert into the access
point’s male MT-RJ fiber optic port, and another female MT-RJ
connector to insert into the MT-RJ adapter.
an adapter for connecting the patch cord to the MT-RJ network.
To connect to an MT-RJ network
1. Remove any cable protectors attached to the patch cord and adapter.
2. Connect the access point to your network as shown in the next
illustration.
Figure 18. Connecting to an MT-RJ Network
Note
The patch cord shown above must connect to the access point with
a female MT-RJ connector. For details, see “Using and Purchasing
the Required Patch Cord and Adapter” on page 55.
Connecting to an
SC Network
To connect to an SC network, you need:
a patch cord with a female MT-RJ connector to insert into the access
point’s male MT-RJ fiber optic port, and an SC connector to insert into
the SC adapter.
an adapter for connecting the patch cord to an SC network.
To connect to an SC network
1. Remove any cable protectors attached to the patch cord and adapter.
To
MT-RJ
networ
k
Female
MT-RJ connector
MT-RJ adapter
Female
MT-RJ connector
Patch cord
To access point