Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
179
To set up logins
1. From the main menu, click Security > Passwords. The Passwords
screen appears.
2. Verify that the Use RADIUS for Login Authorization check box is
cleared.
3. Click Submit Changes to save your changes.
4. Configure the parameters. For help, see the next table.
5. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
Once the changes are activated, you must enter these new values when
you use a web browser or telnet to connect to this access point.