Filter
Top Products
Chapter 6: Configuring Security
180
Table 51. Password Parameter Descriptions
Parameter Description
Use RADIUS for
Login Authorization
Determines if you are using a password server to
authenticate end devices that can communicate
with this access point. Clear this check box.
User Name Enter the user name you need to use to log in to
this access point. This parameter can be from 0
to 16 characters long.
If you leave the user name and password fields
blank, a user will not need to log in to the access
point.
Password Enter the password you need to use to log in to
this access point. This password gives you read
and write access to the access point
configuration. This parameter can be from 0 to 16
characters long.
If you leave the user name and password fields
blank, a user will not need to log in to the access
point.
Read Only
Password
Enter the password you need to use to log in to
this access point. This password gives the user
read-only access to the access point. This user is
able to view the configuration and execute
diagnostics but cannot perform any tasks that
affect the operation of the access point, such as
changing configuration options, rebooting, or
downloading software.
To disable this password, delete it.
Allow Service
Password
If the user enters a login that does not match
either the user name and password or the read
only password, check this check box to allow the
login to be checked against the service
password. Allied Telesyn Technical Support may
use this service password if they need to
troubleshoot this access point.