Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
185
To use an ACL
1. From the main menu, click Security and then click the radio service set
you are configuring. The appropriate radio screen appears.
2. Check the Enable ACL Client Authorization check box if you want to
use an ACL to authorize end devices to communicate with the
network.
3. Click Submit Changes to save your changes.
4. Normally, the access point issues RADIUS requests with the user
name and password of the end device that is trying to communicate
with the network.
Check the Enable Alternative Method ACL check box if you want the
access point to issue RADIUS requests with the user name and
password both set to the MAC address of the end device that is trying
to communicate with the network.
5. (External RADIUS server only) In the ACL RADIUS Client Password
field, enter the password that is used to sign RADIUS access requests
for all end devices attached to this access point. This password must
match the password that is configured in the RADIUS server.
6. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.