Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
81
To set frame type filters
1. From the main menu, click Ethernet > Frame Type Filters. The Frame
Type Filters screen appears.
2. For each frame type field, check or clear the Allow/Pass check box to
configure if the frame types are allowed to pass or are dropped. If you
check the check box, the frame type is allowed to pass. For help, see
the next table.
3. For each frame type field, set the Scope field to Unlisted or All. For
help, see the next table.
4. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.