Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
33
c. In the Secondary LAN Bridge Priority field, enter a number other
than zero.
d. In the Secondary LAN Flooding field, choose Enabled.
6. Configure the spanning tree settings for the point-to-point bridge on the
primary LAN.
a. From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears.
b. In the Root Priority field, enter a number other than 0.
c. In the Secondary LAN Bridge Priority field, enter 0.
d. In the Secondary LAN Flooding field, choose Disabled.
7. In the roaming end devices will be roaming across an IP router, you
must configure IP tunnels. For help, see “Configuring IP Tunnels” on
page 148.
8. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
9. Configure the master radio in the point-to-point bridge on the primary
LAN:
a. From the main menu, click the link corresponding to the master
radio. The radio screen appears.
b. Make sure the Allow Wireless Access Points field is On Primary.