Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
189
5. Under the Security link, click the radio service set you want to
configure for the VLAN. This screen appears.
6. In the VLAN field, enter the VLAN number that encapsulates all frames
received on this radio port. This value must match the values that are
set in the VLAN-capable Ethernet switches on the primary LAN.
Note
The value in the VLAN field is also called the VLAN tag.
7. Repeat Steps 5 and 6 to assign a unique VLAN tag to each service set
that you want to configure to support a VLAN.
8. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
Configuring
WEP 64/128/152
Security
You can configure static WEP keys to provide security between the access
points and the wireless end devices. To use static WEP keys, your radios
must support WEP encryption. All access points and wireless end devices
on a particular network must use the same WEP encryption type and the
same WEP transmit key. You should periodically change this WEP
transmit key to prevent an unauthorized person with a sniffing tool from
monitoring your network and discovering the WEP key.