Filter
Top Products
Chapter 9: Additional Access Point Features
276
Using Command Console Mode
You can use the Command Console mode to manipulate some access
point files and file segments. You can also use Command Console mode
to upgrade access points using TFTP and script files.
You access the Command Console mode through the serial port using a
communications program or over the network using a telnet session. You
cannot access Command Console mode using a web browser interface.
Entering
Command
Console Mode
1. Use a communications program or telnet to start a session with the
access point. For help, see “Using a Communications Program” on
page 40.
2. From the Access Point Configuration menu, choose Maintenance.
3. From the Maintenance menu, choose Command Console. The list of
commands appears.
To exit Command Console mode
At the prompt, type exit.
You return to the Maintenance menu.