Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
47
Using a Web
Browser
Interface
1. On the menu bar, click Save/Discard Changes.
This screen appears.
2. Resolve any error messages listed under the heading Possible
Configurations Errors. For help, see “Using the Configuration Error
Messages” on page 240.
3. Verify that all your configuration changes appear in the Pending
Changes box.
4. Click Save Changes and Reboot to reboot the access point and
immediately use your new active configuration.
Or click Save Changes without Reboot. The access point saves the
changes to its current configuration and continues to run its active
configuration. You need to reboot the access point when you want the
current configuration to become the active configuration.
To discard the changes
Click Discard Pending Changes.
Select to use new configuration
settings the next time you reboot
the access point
Lists possible configuration
changes that still need
to be made
Lists configuration changes
that have been made
Select to use new configuration
settings immediately