Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
239
Restoring the
Access Point to
the Default
Configuration
You may need to restore the access point to the factory default
configuration. For a list of the default settings, see Appendix B, “Default
Settings.” To restore the access point to the default configuration, you can
use the Web browser interface, as explained in the following procedure:
1. In the menu bar, click Save/Discard Changes.
This screen appears.
2. Click Restore Factory Defaults. Under Pending Changes, you will see
a list of what parameters need to be changed.
3. Click Save Changes and Reboot. When the access point is done
rebooting, it will use the factory default settings as its active
configuration. You may need to reset the IP address and other network
parameters.