Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
297
2. In the Server IP Address field, type the IP address of an active TFTP
server from which the software download script file will be retrieved.
3. In the Script File Name field, type the name of a file on the TFTP
server that contains the commands that define the download process.
4. In the Start Time field, enter the time in the format dd:hh:mm:ss
(days:hours:minutes:seconds). When this timer expires, the access
point performs a TFTP get to read the script file from the server and
begins execution of the software download script.
5. In the Next Power Up Time field, enter the time in the format
dd:hh:mm:ss (days:hours:minutes:seconds). When this timer expires,
the access point will reboot, allowing the new firmware to take affect.
6. Click Start.