Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
53
option. For help, see “Connecting to Your Fiber Optic Network” on
page 55.
To connect the AT-WA7501 to the Ethernet network
Attach one end of the Ethernet cable to the 10BaseT/100BaseTx port
on the AT-WA7501 and attach the other end to your Ethernet network
or a power bridge (if you are using power over Ethernet), a Cisco
power bridge or another 802.3af-compliant power bridge.
Connecting the
AT-WA7501 to
Power
If your AT-WA7501 has the internal power supply option, you can use a
power cord to connect the AT-WA7501 directly to an AC power outlet.
Caution
You must use the appropriate Allied Telesyn power supply with
these devices or equipment damage may occur.
Attention: Vous devez utiliser la source d’alimentation Allied Telesyn
adéquate avec cet appareil sinon vous risquez d’endommager
l’équipement.
If you are using the power over Ethernet option, you must have the power
bridge or another 802.3af-compliant power bridge. For help, see
“Connecting Power Over Ethernet” on page 59 and the documentation that
came with your power bridge.
To connect the AT-WA7501 to power
Plug one end of the power cord into the power port on the AT-WA7501
and plug the other end into an AC power outlet. The access point
boots as soon as you apply power.