Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
65
Configuring the TCP/IP Settings
If you are using a DHCP server to automatically assign an IP address to
the access point, go to “Configuring the Access Point as a DHCP Client”
on page 67. If you are not using a DHCP server, you need to manually
assign some TCP/IP parameters.
Note
You should have already configured an IP address for the access
point. For help, see “Configuring the Access Point (Setting the IP
Address)” on page 38.
To configure the TCP/IP settings
1. From the menu, click TCP/IP Settings. The TCP/IP Settings screen
appears.
2. Configure the TCP/IP settings. For help, see the next table.
3. If you want to configure the access point as a DHCP server, see
“Configuring the Access Point as a DHCP Server” on page 70.