Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
151
through an IP tunnel by the root access point unless the destination IP
address belongs to the root IP subnet. (Frames are only forwarded
outbound to end devices that have roamed away from the root IP subnet.)
For detailed information about other frame types that are never forwarded,
see “Frame Types That Are Never Forwarded” on page 147.
You can set the default action and scope for general and specific frame
types:
Allow/ Pass: Check or clear this check box. Check this check box to pass
all frames of the type. Clear this check box to drop all frames of the type.
Scope: Set scope to Unlisted or All. If you select All, then all frames of that
type are unconditionally passed or dropped, depending on the action you
specified. If you select Unlisted, then frames are passed or dropped only if
the frame type is not listed in the predefined or customizable tables.
To use IP tunnel frame type filters
1. From the main menu, click IP Tunnels > Frame Type Filters. The
Frame Type Filters screen appears.
2. For each frame type field, check or clear the check box to configure if
the frame types are passed or are dropped. If you check the check
box, the frame type is allowed to pass.
For each frame type field, set the Scope field to Unlisted or All. For
help, see the next table.