Filter
Top Products
Chapter 1: Getting Started
36
Example - Configuring an 802.11a Point-to-Multipoint Bridge
In this example, each access point only has one 802.11a radio. Since the
802.11a radio can function as a master and a station, wireless end
devices can communicate with either access point.
Figure 15. 802.11a Point-to-Point Bridges
Allied Telesyn recommends that you implement some type of security.
Table 10. 802.11a Point-to-Point Bridges Parameter Settings
Screen Parameter
Bridge
Primary LAN
(Root)
Bridge
Secondary
LAN
(Designated
Bridge)
802.11a
Radio
Allow Wireless Access
Points
On Primary On Primary
Node Type Master Master
SSID Manufactur-
ing
Manufactur-
ing
Spanning
Tree
Settings
LAN ID 11 11
Root Priority 5 0
Ethernet Bridging
Enabled
Checked Checked
Secondary LAN Bridge
Priority
01
Secondary LAN Bridge
Flooding
Disabled Enabled
Primary LAN
Secondary LAN
Root
Host
Designated
bridge